Instrument
Peristaltic Pump, easyFLOW-VS Variable Speed
Pickup available at 8 Bult Drive
Usually ready in 24 hours
The easyFLOW-VS is an economical peristaltic pump for laboratory and low volume process control applications.
Pump rate for the standard unit is 5 L/Hr at full speed. With the small squeeze tube fitted, full speed is 1.6 L/Hr.
Variable Speed
The easyFLOW-VS is a variable speed pump. The speed can be varied either by using the Dose Rate control manually or via External Control. External variable speed control can be either 4 to 20 mA or 0 to 1 V DC.
External On / Off Control
In addition to external variable speed control, the easyFLOW-VS can also be switched on and off externally.
Waterproof Construction
At TPS we realise that dosing pumps are sometimes used outdoors or in wet areas. The easyFLOW-VS is fully waterproof to IP65.
Australian Quality
The easyFLOW-VS is proudly designed and manufactured in Australia. Our aim is to provide you with the best quality, service and value for money. The TPS Quality System has been certified in accordance with the AS/NZS ISO 9001 standard. Since 1968, TPS has built a reputation for excellent backup service that is second to none.
FEATURES
- Fully Waterproof design to IP65
- Variable speed by Dose Rate control
- Variable speed by 4 to 20 mA or 0 to 1 V input
- External On / Off switching capability for process control
- Safe, low power 24V DC operation
- Australian Made
Peristaltic Pump Rate at Full Speed Large Tube : 5 L/Hr (standard) |
Squeeze Tubing Chemical resistant Santoprene tubing |
Power 24V, 500mA AC/DC Adaptor to suit country of destination is supplied. |
Dimensions 200 x 120 x 75 mm |
Mass Pump only : Approx 500g |
Environment Temperature : 0 to 45 oC |