Sensor
Dissolved Oxygen Sensor - WP/AQUA/SmartCHEM
$1,823.80 AUD
/
Includes GST
EDSEN-123204
PREORDER NOW - FOR ESTIMATED SEPTEMBER DELIVERY
For measuring Dissolved Oxygen in liquids.
This sensor serves as a replacement for the EDYSI-123204 Dissolved Oxygen Sensor.
What's in the Box:
Includes sensor, wetting cap, sodium sulphite (for calibration), and service kit.
Please note: Cable not included.
Any needed cables can be included in the pre-order form.
Compatible with:
WP-82Y · WP-91 · WP Plus · SmartChem Lab
90-FLT · 90-FLMV · AQUA-DY
Specifications
| Cathode | Gold |
| Anode | Silver |
| Membrane | FEP Teflon |
| Electrolyte | Half-Saturated KCl |
| Temperature Range | -5 to 45°C |
| Thermistor Accuracy | ± 0.2°C |
| Temperature Compensation | See instrument specifications |
| Polarizing Voltage | 0.8 volts (nominal) |
| Probe Current in Air at 30°C | 19 microamps (nominal) |
| Probe Current in Nitrogen at 30°C | 0.15 microamps or less |
| Measurement Response Time | Typical DO response - 90% in 15 seconds at a constant 25°C temp. Typical response at low DO is 90% in 45 seconds. |
| Temperature Response Time | Typical response - 95% in 45 seconds at a constant 50°C temp. |
| High Temperature Performance | Tested above 65°C, within ±5% of nominal. |
Do you have questions?
Reach out to sales@tps.com.au or give us a call on 1300 HEY TPS.
