- Dual readout of Dissolved Oxygen and pH/mV
- Easy to use
- One-touch calibration
- Full-text prompting and error messages
- Large digit mode
- Fold-out stand for bench use
- Australian Made
The Aqua-DP is a splashproof, easy-to-use, Dissolved Oxygen, pH/mV and Temperature meter. It provides accurate, reliable measurements, and is very easy to use.
Genuine one-touch calibration puts an end to time-consuming calibration procedures.
Rugged and Reliable
TPS has used the latest microprocessor electronics to totally eliminate all internal and external adjustments. The result is a dramatic increase in reliability. The unit is ideal for field or factory use.
The Dissolved Oxygen and pH sensors are designed for maximum durability in field and factory environments.
24 Character Alphanumeric Display
The two-line, 24 character display shows the Dissolved Oxygen plus pH readings simultaneously. Alternatively, a Large Digit mode is available. This shows one reading at a time at almost double the size. To simply use of the Aqua-DP, plain English prompts and error messages are provided. There are no codes to interpret like some other brands.
Calibration of the Aqua-DP could not be simpler.
Just place the sensor into the relevant standard and press the Calibrate key. That's all there is to it !
The Aqua-DP displays sensor condition after calibration has been completed, allowing for preventative maintenance.
All calibration information is stored in memory when the Aqua-DP is switched off, even if the battery is removed.
Salinity correction for ppM Dissolved Oxygen readings is a breeze. Simply enter the Salinity value and the Aqua-DP does the rest !
Low Battery Drain
The Aqua-DP will provide in excess of 70 hours of continuous use with an alkaline 9 volt battery.
A handy battery-saver function switches the Aqua-DP off after 5 minutes if no keys have been pressed. This function can also be disabled for continuous operation.
Correct temperature compensation is vital for accurate Dissolved Oxygen measurements. The Aqua-DP compensates for membrane permeability for all readings and also for Dissolved Oxygen solubility in ppM mode.
Temperature compensation for pH probe performance is also fully automatic.
The Aqua Series is proudly designed and manufactured in Australia. Our aim is to provide you with the best quality, service and value for money. The TPS Quality System has been certified in accordance with the AS/NZS ISO 9001 standard. Since 1968, TPS has built a reputation for excellent backup service that is second to none.
Range : 0 to 25.0 ppM
Resolution : 0.1 ppM
Accuracy : +/-0.1 ppM
Range : 0 to 250.0 %Sat'n
Resolution : 0.1 %Sat'n
Accuracy : +/-0.3 %Sat'n
Range : 0 to 14.00 pH
Resolution : 0.01 pH
Accuracy : +/-0.01pH
Range : 0 to +/-999mV
Resolution : 1mV
Accuracy : +/-1mV
Temperature Range : -10.0 to 120.0 oC (sensor limit 50 oC)
Resolution : 0.1 oC
Accuracy : +/-0.2 oC
Salinity Correction User-set, from 0 to 50.0 ppK NaCl
Automatic one-touch calibration in Zero solution and in Air
Automatic one-touch calibration in 4.00, 6.88, 7.00, 9.23 or 10.06 pH buffers.
Automatic calibration against reference thermometer
Temp Sensor Offset Range
-10.0 to +10.0 oC
Dual automatic system for :
1. Membrane permeability
2. Solubility compensation in ppM mode
Automatic, 0 to 100 oC.
Tough, ABS plastic case, waterproof to IP65
24 Character alphanumeric LCD with full-text prompts and error messages.
Battery Saver Function
On : Automatically switches off after 5 minutes of no use.
Off : Unit remains on for continuous use.
Power 9V Alkaline battery for 100+ hours.
Dimensions 157 x 78 x 35 mm
Instrument only : Approx 250g
Full Kit : Approx 1.5kg
Environment Temperature : 0 to 45 oC
Humidity : 0 to 90% R.H.
- Aqua DP
- 200ml pH 7 Buffer
- 200ml pH 4 Buffer
- 1 YSI Dissolved Oxygen Sensor
- 1 YSI Cable
- Your Choice of pH or ORP Probe (Standard, Premium)
- Instruction Manual
- Optional Hard Case