Industrial PH Sensors

PH SENSORS FOR INDUSTRIAL USE

INTERMEDIATE JUNCTION PH SENSOR

Description Epoxy body combination pH sensor, with unique Intermediate Junction reference design. The sleeve at the end of the sensor can be removed for cleaning. Suitable for difficult samples such as slurries that could block other reference junctions.  Two sleeves are provided - one with protective forks (as shown), and a narrow sleeve suitable for insertion into meats and cheeses.
pH range 0 to 14 pH
Temperature Range 0 to 60 OC (32 to 140 OF)
Reference System Ag/AgCl, with Intermediate Junction reference.
Dimensions 120 x 12 mm (diameter of spear sleeve is 8mm)
Ordering
Description Part No
Sensor with 5m cable & Waterproof BNC Plug 111227
Sensor with 1m cable & BNC Plug 121234
Sensor with 1m cable & TPS4 Plug 121232
Sensor with 2m cable & BNC Plug
121235
Extra cable (order by the metre) 130040

SCREW-IN PH SENSOR

Description Epoxy body combination pH sensor, 1/4" BSP screw-in tip. Minimal pipe intrusion. (Low pressure only)
pH range 0 to 14 pH
Temperature Range 0 to 60 OC (32 to 140 OF)
Reference System Ag/AgCl, single junction with Porous Teflon junction.
Dimensions 45 x 12 mm
Ordering
Description Part No
Sensor with 5m cable & Crimp Pins
111244
Sensor with 2m cable & Crimp Pins
111268
Extra cable (order by the metre) 130040

Download this Specification Sheet in PDF format (0.16MB, .PDF)

Hint : Right click on a link, then select "Save Target As..." or "Save Link As..." to save the file to your own computer.
If you do not have Adobe Acrobat in your computer, a free Acrobat Reader can be downloaded by clicking on the following link.