PROCHEM-R

Prochem-r Redox (Orp) Controller With Dual Set Points

PROCHEM-R

 

The NEW proCHEM Series controllers provide an economical answer to most process monitoring, control or recording requirements.

Dual Set Points are provided. The default setup for these are as "Too High" and "Too Low" control points. The user can also re-set them so that they are both "Too High" or both "Too Low" control points. An example of this type of setup is where the proCHEM unit has one point set to control the process, and a second point beyond that set to activate an alarm.

Separate LED's indicate when either of the Set Points has been exceeded. The output relays are rated to 240V and are fused at 1 Amps. Higher currents can be switched with an external contactor. 

All proCHEM units are easy to install. They are housed in a rugged plastic case which is non corrosive, waterproof and dustproof to IP65. All controls can be accessed via the hinged, clear cover. The large LCD display is easy to read, even from a distance.

The proCHEM series is designed for maximum flexibility. 4 to 20 mA and 0 to 1 V DC outputs are provided as standard.

For a total solution to your control requirements, TPS also offers a peristaltic pump, the easyFLOW-VS. The proCHEM series is proudly designed and manufactured in Australia. The TPS Quality System has been certified in accordance with AS/NZS ISO9001 standards. Since 1968, TPS has built a reputation for excellent backup service that is second to none.

Product price

Product ID Product options Price
111124 proCHEM-ORP Controller, 240V AC In, Dual Limits, 4-20mA Out $719.00
111124/5 proCHEM-ORP with 5 metre dip or screw-in ORP sensor $926.00

Specifications

Range
0 to +1000 mV (0 to -1000 mV optional)

Resolution
1 mV

Accuracy
+/-1 mV

Linearity
+/-1 mV

Repeatability
+/-1 mV

Ambient Drift
<0.02% span/oC

Long Term Drift
<0.1% per year

Zero Range
+/-100 mV

Input Impedance
>3 x 1012 Ohms

Common Mode Rejection
120dB

Enclosure
Polycarbonate, waterproof to IP65

Display
12.5mm LCD

Outputs
Current : 4 to 20 mA
Voltage : 0 to 1 V DC 
Contacts : Two relays with changeover contacts. Rated to 240V, 1 Amp

Isolation
Galvanic isolation of sensor input
Current and voltage outputs are not isolated

Power
220/240 V AC, 50/60Hz, 2VA
12V DC power optional. 

Dimensions
215 x 190 x 115 mm 

Mass
Instrument only : Approx 900g 
Full Kit : Approx 1.5kg

Instrument Operating Environment
Temperature : 0 to 45 oC
Humidity : 0 to 95% R.H.

Ordering Information

Part No
5 metre bundle 111124/5:
proCHEM-ORP, 5m................................111124/5

Kit Includes: 
Submersible ORP sensor, 5m cable...............111260
Earth guard, Stainless steel, 5m cable.........121360
Zobell Standard, 100mL each of Part A & B......121309
Manual.........................................130050

Options and Accessories
ORP Sensor Upgrade: difficult samples such as meat, dairy, slurries...
ORP, Intermediate Junc, 5m.....................121260/5 

Cable Extension:
Extended cable/metre...........................130040

Instrument Options:
Relay control output...........................130342
12V DC Power option............................130072
Submersible Assembly...........................111303

Same Price Interchange Option:
Screw-in ORP (1/4" BSP thread - Low pressure 275 kPa):
Screw-in ORP, 5m cable.........................111262
Screw-in adaptor for 40mm/50mm PVC pipe........111305

Download this Specification Sheet in PDF format (0.42MB, .PDF)
Download the manual for this instrument (0.51MB, .PDF)

Hint : Right click on a link, then select "Save Target As..." or "Save Link As..." to save the file to your own computer.
If you do not have Adobe Acrobat in your computer, a free Acrobat Reader can be downloaded by clicking on the following link.